VW MK2 MK3 Golf Jetta Caddy Corrado 1.9 TDI 06A PD VNT 1.8T BAM Engine Mount

A2, A3 & A03 chassis 1.9 TDI PD 06A Block, VNT Turbo & 1.8T K04 Engine Swap Mount

This Mount allows the fitment of an 06A Blocked, TDI PD & 1.8T Into a MK2 or MK3 Golf platformed vehicle when using a PD VNT or K04 Turbocharger

This mount is essential when fitting a 1.9 PD or 1.8T BAM etc. into any of the vehicles below to allow turbo clearance. The mount is also needed if fitting and earlier 06A block such as the ALH & AHF etc. with an upgraded VNT PD turbo

This mount also gives more driveshaft clearance with 4 Motion conversions. 


Suitable for the following models:

MK2 Golf / Jetta (requires subframe from one of the vehicles below)
Corrado (requires subframe from one of the vehicles below)
MK2 Caddy Van (9K)
SEAT Inca Van (9K)
MK3 Golf / Vento
MK3 Cabrio
SEAT Ibiza / Cordoba (6k & 6K2)
SEAT Toledo (1L)
Polo Classic (6k & 6K2)
Passat B3/4

Laser cut, CNC folded and TIG welded. Supplied in raw steel.

PLEASE NOTE: 

The postage costs stated do not include "Out Of Areas": 

• Isle Of Man, Isle Of White, Northern Ireland, Republic of Ireland, Shetland & Orkney, Scottish Highlands & Islands, Channel Islands, Scilly Isles & BFPO. Inculuding the following postcodes: AB31, AB33-AB38, AB 44-45, AB 51-56, HS 1-9, IV 1-28, 1V 30-32, IV 36, IV 40-49, IV 51-56, IV 63, KA 27-28, KW 1-17, PA 20-38, PA 41-49, PA 60-78 , PH 19-26, PH 30-44, PH 49-50, TR 21-25, ZE 1-3, All BT, All GY, All JE, All IM 

This is an example of a product tab.

These are optional but provide a means of displaying more content and using less space on the page.